Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
ansys [2011/10/28 17:59]
rbutler Bolded things.
ansys [2017/10/11 17:17]
jbeck [Installing Ansys Multiphysics 18.2]
Line 1: Line 1:
-====== ANSYS 13.0 ====== +====== ANSYS 18  ​====== 
-Due to the size of the installation,​ please DO NOT attempt to install this application via a wireless or VPN network connection. ​ Prior to installing any new version or upgrade, please ensure that you are connected to a live, wired, Ethernet jack on campus and that your wireless network interface is disabled. You will need to uninstall any previous version of Ansys prior to installing ​v13.0 as Ansys v13.0 Workbench will not function otherwise.+Due to the size of the installation,​ please DO NOT attempt to install this application via a wireless or VPN network connection. ​ Prior to installing any new version or upgrade, please ensure that you are connected to a live, wired, Ethernet jack on campus and that your wireless network interface is disabled. You will need to uninstall any previous version of Ansys prior to installing ​v18 as Ansys v18 Workbench will not function otherwise.
  
-===== Installing Ansys Multiphysics ​13.===== +===== Installing Ansys Multiphysics ​18.===== 
-  - IE users may click to follow the link, for any other browser you will need copy & paste the link into a **Run...** dialog window or  +  - IE users may click to follow the link, for any other browser you will need copy & paste the link into a **Run...** dialog window or the Windows Start Menu search box. 
-the Windows ​Start Menu search box. +    - [[\\fsvs01\Applications\Public\netapps\Ansys\18.2\windows\disk1]]
-    - 32-bit users should browse to the following folder:  ​\\stuapp\netapps\Ansys\v13.0\x32\dvd1 +
-    - 64-bit users should browse to the following folder:  ​\\stuapp\netapps\Ansys\v13.0\x64\dvd1+
     - Right click **InstallPreReqs.exe** and select **Run as Administrator**     - Right click **InstallPreReqs.exe** and select **Run as Administrator**
     - If you receive a Security Warning window, click **Run** to continue the install. ​ Allow all of the required prerequisite programs to install normally. ​ Click **Run** in any following security windows. ​ This should require minimal user interaction     - If you receive a Security Warning window, click **Run** to continue the install. ​ Allow all of the required prerequisite programs to install normally. ​ Click **Run** in any following security windows. ​ This should require minimal user interaction
   - Following the prerequisite program installations,​ right click on setup.exe and select **Run as Administrator**   - Following the prerequisite program installations,​ right click on setup.exe and select **Run as Administrator**
     - If you receive a Security Warning window, click **Run** to continue the install.     - If you receive a Security Warning window, click **Run** to continue the install.
-  - Click **Install ANSYS, Inc. Products**+  - Click **Install ANSYS Products**
   - Select **I Agree** in the License Agreement window to accept the license agreement   - Select **I Agree** in the License Agreement window to accept the license agreement
-    - Click **Next** +    - Click the arrow on the right side of the window. ​ For the rest of this install ​guidethis will be refrenced to as clicking Next.
-  - If prompted for platform to install, ​select your platform. ​ (**Windows 32** vs**Windows 64**)+
   - Click **Next** to accept default installation path.   - Click **Next** to accept default installation path.
     - You may choose to disable the ANSYS RSS feed if you wish.     - You may choose to disable the ANSYS RSS feed if you wish.
-  ​In the Select Installation Components ​window, accept the defaults and click **Next** to continue. +    ​Leave the file extension settings enabled (default) 
-    - If you have Pro/E or any of the other programs that Ansys can interface with, make sure to check the box next to those products so that the appropriate files will be installed.  These may already be appropriately marked for you. +  - The Enter License Server Specification ​window ​should appear next 
-  If you have Pro/E installedenter the path to your ProE installation and click **Next**. +    - If you had a previous version ​of ANSYS installed ​you may not receive this window.  If it doesplease ensure it matches ​the following: 
-    If you do not have Pro/E installed select **Skip this step for ICEM and configure later** and click **Next** to continue.  +      ANSYS Licensing Interconnect port number (default is 2325): ​ ''​2325''​ 
-  - Accept ​the defaults ​for the Unigraphics NX installation if prompted; click **Next**. +      - ANSYS FLEXlm port number (default is 1055): ​ ''​1400''​ 
-    - **Skip this step for ICEM and configure later** should ​be checked for you.  ​If not, check it and click **Next** to continue.  +      - Select number of license server machines: ​ 1-server 
-  - The installer will now verify the license manager file dates. ​  +      - Hostname 1:  ''​NETAPP01.olin.edu''​ 
-    - Click **Next** after verification has completed. +  - At the following screen ​for configuring ​the additional plugins, select "Skip all and configure later" at the bottom, these can be configured as needed.  Click Next 
-  - Click **Next** at the review screen to begin installation. ​ +  - Click **Next** at the review screen to begin installation. ​  ​
     - At first it may install any missing prerequisites that ANSYS needs to run.  If you quickly receive a message that **Everything was successfully installed,​** do not close out of the installation window.     - At first it may install any missing prerequisites that ANSYS needs to run.  If you quickly receive a message that **Everything was successfully installed,​** do not close out of the installation window.
     - This installation can take a very long time.  The window may appear to freeze during the installation or not give any indication that the install has started immediately.     - This installation can take a very long time.  The window may appear to freeze during the installation or not give any indication that the install has started immediately.
   - When prompted for the path to DVD to copy and paste the following into the dialog box:   - When prompted for the path to DVD to copy and paste the following into the dialog box:
-    - 32-bit users: ​ ''​**\\stuapp\netapps\Ansys\v13.0\x32\dvd2**''​ +    - [[\\fsvs01\Applications\Public\netapps\Ansys\18.2\windows\disk2]] 
-    64-bit users: ​ ''​**\\stuapp\netapps\Ansys\v13.0\x64\dvd2**''​+   You may also select ​**Browse** and travel up one directory and select the disk2 folder 
 +  Click **OK**
   - Click **Next** after the installation has completed. ​   - Click **Next** after the installation has completed. ​
-  - The license file will configure some settings, the **Specify the License Server Machine** window may popup. +  - Click **Next** at the Finish Installation screen. 
-    - If you had a previous version of ANSYS installed you may not receive this window +  - You may be prompted to answer survey questions, ​uncheck this box before selecting Exit if you do not want to do so
-  - If there is already an ANSYS Flexlm server specified, click exit.  If there is no machine specified, ensure that your licensing info matches the following:​ +  - Click **Exit** in the installation manager.
-    - ANSYS Licensing Interconnect port number (default is 2325): ​ 2325 +
-    - ANSYS FLEXlm port number (default is 1055): ​ 1400 +
-    - Select number of license server machines: ​ 1-server +
-    - Hostname 1:  STUAPP +
-  - Click Exit at the Licensing Client Installation Configuration Screen +
-  - Click Next at the Finish Installation screen. +
-  - You may be prompted to answer survey questions, ​click Finish ​to skip or click Next to answer the questions+
-  - Click Exit in the installation manager. +
-  - Load ANSYS Workbench. ​ Select: Tools > License Preferences… +
-  - Under **Global Settings** select **Use Academic Licenses** if it is not already selected, click Apply, click OK +
-    - You will need to restart ANSYS Workbench for the changes to take effect. +