This is an old revision of the document!


AV Cart Instructions

Powering On

  1. Touch the Crestron panel to activate the system (as it may be asleep).
    • This will take you to the control page.
  2. Selecting an input source from the top of the page, such as Computer, will automatically turn on the projector and lower the screen.

Laptop Connectivity

  1. Connect your laptop to the VGA cable placed on top of the cart.
    • This cable includes a built-in audio cable; this should be hooked up if audio is necessary
  2. For connecting your laptop to the network/internet, use the Ethernet cable stored in the top drawer to connect your laptop to the cart’s Ethernet jack (next to the VGA connection) or connect via wireless network.

For Use with the VCR/DVD Player

  1. To use the DVD/VCR combo player, simply select either the DVD or VHS on the Crestron menu and you will then have control of the source selected.

For Use with an Auxiliary Audio/Video Source

  1. Locate the Auxiliary inputs just below the accessory drawer and connect your audio/video source. Select AUX from the Crestron Panel.

System Shutdown

  1. Once your presentation is over, press EXIT on the lower right corner of the Crestron panel. This will turn the projector off and raise the screen.

Additional Info

  1. To hide the displayed image while using the chalkboard/whiteboard, press Mute, found under the projector On and Off buttons. The display will reappear by touching Mute again.
  2. If the projector fails to turn on during touch panel activation or if you are experiencing any other strange system behavior please EXIT the system and then boot back in. This will reset the system.
  3. It is necessary that the projector cool down for ~3 minutes before the option will be available to power on again.