This is an old revision of the document!


CREATING/PRINTING SIGNS FOR OUTDOOR HOLDERS

There are 3 double sided 28” x 40”, wind/weather resistant signs holders

Creating Signs

  • Create sign in Microsoft Word
  • Design layout
    • keep all information on one 8.5×11 page with portrait orientation
  • Olin Logo’s are available on the portal (https://my.olin.edu)
  • Save document in Word then convert to PDF
  • Save file in location that you can access from the computer lab
    • Network drive; webmail; bring USB drive

PRINTING DOCUMENT

  • To print on large format printer in computer lab, choose MHL22H01 from printer directory. You may have to add this unit to your available printers. See the IT Web site at IT Web Site for instructions on adding network printers. NOTE: be sure to choose the instructions for Windows 7 if you are using the computers in MHL22 computer lab.
    • After you choose the printer go to printer properties and select the Paper/Quality Tab
  • Use the drop down menu under document size and choose size F for outdoor signs as this is predefined as 28×40
  • Choose “more” from drop down to find size F if not available on first screen

  • Set paper source to “Roll” and paper type to “Any”
  • Choose “OK” again to leave the Paper/Quality Tab
    • From the Print Menu under Page Handling, Page Scaling
  • choose “Fit to Printable Area”.
  • choose auto rotate and center
  • uncheck box for “Choose paper source by PDF page size”

  • Your print preview should display your document in the appropriate size
  • Select “OK” from the Print menu

Check the paper in the large format printer before you print your signs. All printing should be done from the computer lab as paper supplies should be checked and print job monitored so misprints can be quickly identified and canceled. Helpdesk staff can instruct you on proper ways to load paper in these printers. Place a Work Order workorders@olin.edu or http://isisweb.olin.edu/ with the following information

  • Pick up location of signs
  • How many signs you have and desired locations
  • When the signs must be put out and taken in

For any questions concerning signs, please email: campusservices@olin.edu Printing issues email help.desk@olin.edu

Remember to bring you Olin ID to access the Milas Hall LL22 Computer Lab.