Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
poster_printer_tips [2015/12/09 09:57]
mfitzpatrick [HP Design Jet T1100ps]
poster_printer_tips [2017/04/19 11:21] (current)
nsherman [Page Setup]
Line 33: Line 33:
     - Click **OK** again if you get the Feature tip regarding any conflicts with margin size     - Click **OK** again if you get the Feature tip regarding any conflicts with margin size
     - You should now have an option that says **PostScript Custom Page Size** in the box next to size showing dimensions a x b, where a and b are the dimensions you entered in Step 7c.  ​     - You should now have an option that says **PostScript Custom Page Size** in the box next to size showing dimensions a x b, where a and b are the dimensions you entered in Step 7c.  ​
-  - You now need to specify the orientation of your image on the page you have defined. ​ You’ll want to use the settings in Orientation to do this.  You’ll need different settings depending on which dimension in your image is closer to ''​42"''​ and which dimension is larger. \\ {{:​t1100photshop1.jpg?​370x500|}} \\ +  - You now need to specify the orientation of your image on the page you have defined. ​ You’ll want to use the settings in Orientation ​(found under the Paper/​Quality tab) to do this.  You’ll need different settings depending on which dimension in your image is closer to ''​42"''​ and which dimension is larger. \\ {{:​t1100photshop1.jpg?​370x500|}} \\ 
   - If Your image is a portrait, select **Portrait.**   - If Your image is a portrait, select **Portrait.**
     - Then, check the image to the left, and compare it to yours. If both your x and y are less than ''​42'',​ check the **rotate by 90 degrees** checkbox.     - Then, check the image to the left, and compare it to yours. If both your x and y are less than ''​42'',​ check the **rotate by 90 degrees** checkbox.
     - If only your y is larger than ''​42'',​ leave the box unchecked.     - If only your y is larger than ''​42'',​ leave the box unchecked.
     - If x is larger than y, you have a landscape image, skip down a bit.     - If x is larger than y, you have a landscape image, skip down a bit.
-    - If both are larger than ''​42''​, your image and/or paper size is too to print on this printer. \\ {{:​t1100photshop2.jpg?​500x310|}} ​ \\+    - If both are larger than 42, your image and/or paper size is too large to print on this printer. \\ {{:​t1100photshop2.jpg?​500x310|}} ​ \\
   - If your image is a landscape, select **Landscape**   - If your image is a landscape, select **Landscape**
     - Then check the image to the left.  If both x and y are less than ''​42'',​ leave the **Rotate by 90 degrees** checkbox unchecked.     - Then check the image to the left.  If both x and y are less than ''​42'',​ leave the **Rotate by 90 degrees** checkbox unchecked.