Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
av_cart_instructions [2012/08/07 16:52]
jbeck [Additional Info]
av_cart_instructions [2012/08/08 08:48] (current)
jbeck
Line 2: Line 2:
  
 ===== Powering On ===== ===== Powering On =====
-  ​Touch the Crestron panel to activate the system (as it may be asleep). ​+  ​Touch the Crestron panel to activate the system (as it may be asleep). ​
     * This will take you to the control page.      * This will take you to the control page. 
-  - Selecting an input source from the top of the page, such as **Computer**,​ will automatically turn on the projector and lower the screen. 
  
 ===== Laptop Connectivity ===== ===== Laptop Connectivity =====
-  ​Connect your laptop to the VGA cable placed ​on top of the cart. +  ​Connect your laptop to the provided ​VGA cable on top of the cart. 
-    * This cable includes a built-in ​audio cable; this should be hooked up if audio is necessary +    * If using audio, connect ​the 1/8” plug (attached to the VGA cableto the headphone output on your laptop. 
-  - For connecting your laptop to the network/internet, use the Ethernet ​cable stored in the top drawer ​to connect your laptop to the cart’s ​Ethernet ​jack (next to the VGA connection) ​or connect via wireless ​network.+    * If a network connection is necessary ​connect your laptop to the Ethernet ​cable which will also be connected ​to the right side of the lectern ​or use available ​wireless ​connectivity. 
 +  * Selecting the **Computer** input source from the top of the control page; this automatically turn on the projector and lower the screen.
  
 ===== For Use with the VCR/DVD Player ===== ===== For Use with the VCR/DVD Player =====
-  ​- To use the DVD/VCR combo player, simply select either ​the **DVD** or **VHS** on the Crestron menu and you will then have control of the source ​selected.+  ​* Selecting ​the **DVD** or **VHS** ​input source from the top of the control page; this automatically turn on the projector ​and lower the screen. 
 +  * Control buttons now appear on the screen for the selected ​sourceOpen the main cabinet door on the lectern, insert your tape into the VCR or DVD/CD and use the controls on the touch panel to play your VHS tape/DVD/CD
  
 ===== For Use with an Auxiliary Audio/Video Source ===== ===== For Use with an Auxiliary Audio/Video Source =====
-  ​Locate the Auxiliary inputs just below the accessory drawer and connect your audio/video source. Select **AUX** from the Crestron Panel+  ​Locate the Auxiliary inputs just below the accessory drawer and connect your audio/video source. Select **AUX** from the Crestron Panel.
- +
-===== System Shutdown ===== +
-  - Once your presentation is over, press **EXIT** on the lower right corner of the Crestron panel. This will turn the projector off and raise the screen.+
  
 ===== Additional Info ===== ===== Additional Info =====
-  - To hide the displayed image while using the chalkboard/​whiteboard,​ press **Mute**, found under the projector ​**On** and **Off** buttons. ​The display ​will reappear by touching ​**Mute** again. +:!: **System Shutdown Procedure** 
-  ​If the projector fails to turn on during touch panel activation or if you are experiencing any other strange system behavior please **EXIT** the system and then boot back in. This will reset the system. +  * Once your presentation is overpress **EXIT** on the lower right corner of the Crestron panel. This will turn the projector off and raise the screen. 
-  ​It is necessary that the projector cool down for ~3 minutes before the option will be available to power on again.+ 
 +:!: **Temporarily Hiding the Selected Display** 
 +  * Please use the mute button (located under the projector on and off buttons) to temporarily mute the displayed image during a presentationAlthough no image is will be displayed, the projector bulb is still running. 
 + 
 +:!: **Troubleshooting** 
 +  ​If the projector fails to turn on during touch panel activation or if you are experiencing any other strange system behavior please **EXIT** the system and then boot back in. This will reset the system. 
 +  ​It is necessary that the projector cool down for ~3 minutes before the option will be available to power on again.