Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
cadence_pspice [2012/06/06 13:51]
dterry
cadence_pspice [2016/06/08 13:32] (current)
ppfenninger
Line 1: Line 1:
 ====== Installing Cadence PSpice PSD 15.1 ====== ====== Installing Cadence PSpice PSD 15.1 ======
-  ​- IE users may click on the following link to begin the installation process, for any browser you will need to copy & paste it into the Run box (Start ​Run…): \\stuapp\netapps\Cadence\PSD151_wint.Base\CDROM1\setup.exe + 
-  - Click **Yes** to accept the license agreement. + 
-  - Click **Install Products** +    ​- IE users may click on the following link to begin the installation process, for any browser you will need to copy & paste it into the Run box (**StartRun…**   OR: **Windows Key + R**): [[\\stuapp\netapps\Cadence\PSD151_wint.Base\CDROM1\setup.exe|\\stuapp\netapps\Cadence\PSD151_wint.Base\CDROM1\setup.exe]] 
-  - Click **OK**. ​ (This is not necessary) +    - Click **Yes** ​  ​to accept the license agreement. 
-  - Enter 5280 for the port number and stuapp for the hostname.6. Enter your name and company if not already present ​and click **Next**. +    - Click **Install Products** 
-  - Click **Yes** to confirm your entry. +    - Click **OK**. ​ (This is not necessary) 
-  - Enter the following path for the controlfile.txt ​  ​[[\\Stuapp\Licenses\Cadence\ControlFiles\PSD_15.1\controlfile.txt]] ​ and click **Next**. +    - Enter ''​5280'' ​  for the port number and ''​stuapp'' ​  for the hostname 
-  - Choose **Select products from both solutions** and click **Next**. +    - Enter your name and company if not already present 
-  - The products to be installed were specified ​in Step 8 by the controlfile.txt. ​ Click **Next**. +    - Click **Next**. 
-  - Click **Next**. +    - Click **Yes** ​  ​to confirm your entry. 
-  - Click **Yes**. +    - Enter the following path for the controlfile.txt ​  [[\\Stuapp\Licenses\Cadence\ControlFiles\PSD_15.1\controlfile.txt|\\Stuapp\Licenses\Cadence\ControlFiles\PSD_15.1\controlfile.txt]] and click **Next**. 
-  - Choose Orcad Layout Footprint Viewer and click Next.14. Click **Next**. +    - Choose **Select products from both solutions** ​  ​and click **Next**. 
-  - Click **Next**. +    - The products to be installed were specified by the controlfile.txt. ​ Click **Next**. 
-  - Click **Next**. +    - Click **Next**. 
-  - You may see the following message, simply click **OK** +    - Click **Yes**. 
-  - You may also see the following message. The Cadence Website confirms this is a known issue with Windows XP and the program has actually installed. ​ The error is not correct. +    - Choose ​**Orcad Layout Footprint Viewer**   and click **Next**. 
-  ​- Click **Yes**. +    - Click **Next**. 
-  - Click **Yes**. +    - Click **Next**. 
-  - Click **OK**. NOTE: If you need these libraries installed you will need to come to the helpdesk ​since they can only be installed via CD. +    - Click **Next**. 
-  - Click **Finish**.+    - You may see the following message, simply click **OK** 
 +    - Click **Yes**. 
 +    - Click **Yes**. 
 +    - Click **OK**. 
 +      * NOTE: If you need these libraries installed you will need to come to the Help Desk since they can only be installed via CD. 
 +    - Click **Finish**.