Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
jenzabar_installation [2019/06/26 11:39]
mfitzpatrick
jenzabar_installation [2022/08/01 17:46] (current)
rosterberg
Line 1: Line 1:
-====== Installation and Logon Procedures for Jenzabar ======+====== ​(old) Installation and Logon Procedures for Jenzabar ======
  
 +**THIS IS LEGACY INFORMATION. PLEASE SEE: [[jenzabar|Olin College Jenzabar Environment]]**
  
 +----
 +.
 +
 +.
 +
 +.
 +
 +.
 +
 +.
 +
 +.
 +
 +==== Installing SSH client ====
   - Go to Run.. (Windows Key + R) and paste the following into the Run box and press **OK**:   - Go to Run.. (Windows Key + R) and paste the following into the Run box and press **OK**:
     * [[\\fsvs01\Applications\Public\SSH\Workstation\Windows\v3.2.9\SSHSecureShellClient-3.2.9.exe]] ​     * [[\\fsvs01\Applications\Public\SSH\Workstation\Windows\v3.2.9\SSHSecureShellClient-3.2.9.exe]] ​
     * Use all the default settings until the installation completes itself (aka: Yes it to death☺)  ​     * Use all the default settings until the installation completes itself (aka: Yes it to death☺)  ​
-  - Install ​QuickMate v1.3b+==== Installing ​QuickMate v1.4====  
 +     * Installation instructions:​ 
 +       * [[\\FSVS01\Applications\Public\Quickmate\Install-Jenzabar-QuickMate-1_4.docx]]
      * Go to Run.. (Windows Key + R) and paste the following into the Run box and press **OK**:      * Go to Run.. (Windows Key + R) and paste the following into the Run box and press **OK**:
-       * [[\\fsvs01\Applications\Public\Quickmate\v1.3b\qm1_3b.exe]] +       * [[\\fsvs01\Applications\Public\Quickmate\v1.4\setup.exe]] 
-  - At the Welcome screen, press **Next**  +
-  - At the Setup Type screen, choose **Stand-alone Workstation** and then press **Next** -  +
-  - At the Choose Destination Location screen, press **Next**  +
-  - At the Select Program Folder, choose **Next**  +
-  - At the Preserving Local Settings screen, select **Use new global settings**, and press **Next**  +
-  - At the Start Copying Files screen, press **Next**  +
-  - At the Setup Complete screen, leave the settings as is and press **Finish Configuration** +
-  - When the Configuration Wizard opens, check the box that says **'Do not always start the Configuration Wizard’**  +
-  - Press **Next**  +
-  - At the Configure Authorized Hosts screen, press the button for **Configure...Hosts allowed to connect to QuickMate**  +
-  - Add the following address:  +
-    * ''​cx01.olin.edu ''​ +
-  - After they have been added, press **OK** +
-  - Once this is done, simply press **Next** for the rest of the configuration screens +
-  - Quickmate will now be installed ​+
  
 ===== Jenzabar Log In ===== ===== Jenzabar Log In =====