Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
jvpn [2020/06/25 09:49]
mhorne [Pulse Secure (Juniper) VPN Installation and Configuration]
jvpn [2021/03/24 08:15] (current)
mamaral
Line 1: Line 1:
-======Pulse Secure ​(formerly Juniper) ​VPN  Installation and Configuration====== +======Pulse Secure VPN Installation and Configuration======
- +
-The Pulse Secure (formerly known as Juniper Pulse) VPN client is Olin's current method of remotely connecting to internal network resources from off campus. +
- +
-Please only load the VPN client on Olin or personal systems. Do not load the client on any public kiosk style or non-personal machines. +
- +
-Please note that the new Pulse Secure VPN service may take up to 30 seconds for your machine to complete the connection to the Olin VPN server even though the icon on the desktop shows the connection is active. +
- +
-=====Web VPN Portal===== +
- +
-You may choose to use the  web based interface to access network resources after logging ​ into the web portal: https://​jvpn.olin.edu using your network credentials. +
- +
-There is a list of bookmarked links to commonly used sites as well as a file section that provides direct access o the Olin internal file cluster and user home folders. +
- +
-When accessing file shares in this manner, you will have to download the files you would like to modify to your local machine, modify them, then upload them back to your location on the network file share through the web portal. +
- +
-Please Note: To run networked applications such as Matlab, you must use the client software so your computer is recognized as being on the Olin domain. ​  +
-=====Windows===== +
- +
-  * Log into [[https://​jvpn.olin.edu|jvpn.olin.edu]] with your network credentials and choose the link for **VPN-Installers** under the file section to download the installation software. +
- +
-  * Download and install the installation for your [[:​32_or_64|operating system architecture]]. +
-  * Double-click the installer to begin the installation. +
-  * Click **Next** on the Welcome screen +
-  * Leave the Setup Type as Complete and **Next** again +
-  * Click **Install** at the Ready to Install window. +
-  * You will get a pop up for UAC (User Account Control) click **Yes** to allow installation. +
-  * Click **Finish** once installation is completed and the Junos client will automatically launch. +
-  * Click on the Junos Pulse icon on the task bar then select the **Open Pulse** option. +
-==== Configuration ==== +
-  * Click the **plus sign** under Connections to add a new connection +
-  * Leave Type as "​Policy Secure (UAC) or Pulse Secure (VPN)"​ +
-  * Enter a name you will recognize for the connection such as ''​OLIN''​  +
-  * Enter ''​jvpn.olin.edu''​ for the Server URL. +
-  * Click **Add**. +
-  * Click **Connect** on your newly created connection. +
-  * Enter your Olin network credentials when prompted for login credentials then check **save settings**. +
-  * Select a session and click **Connect**. +
-  * To disconnect, left click the Junos Pulse icon in your system tray (by your clock), select the connection **OLIN** and then **Disconnect**. +
- +
-=====Mac===== +
- +
-  * __**From on campus**__:​ +
-    * Open Finder. +
-    * Select **Go** at the top of your screen. +
-    * Select **Connect to Server**. +
-    * Connect to ''​[[smb://​fsvs01/​Applications/​Public/​VPN/​Mac |smb://​fsvs01/​Applications/​Public/​VPN/​PulseSecure/​MacOS]]''​ +
-  * __**From off campus**__:​ +
-    * Log into [[https://​jvpn.olin.edu|jvpn.olin.edu]] with your network credentials and choose the link for **VPN-Installers** under the file section to download the installation software. +
- +
-  * Double-Click the installer and then double-click ''​PulseSecure.dmg''​ +
-  * Click **Continue** and then **Install** +
-  * When prompted, enter in your local Mac password (not network credentials) +
-  * Wait for the installation to complete, then click **Close**. +
-  * Click the new  PulseSecure icon in the top right of your screen (by the clock). +
-  * Select **Open PulseSecure**. +
-==== Configuration ==== +
-  * Click the **plus sign** to make a new connection +
-  * Enter a name for the connection such as ''​OLIN''​  +
-  * Enter ''​jvpn.olin.edu''​ for the Server URL and click **Add**. +
-  * Click **Connect** on your newly created connection. +
-  * Enter your Olin network credentials when prompted for network credentials and check **save settings**. +
-  * Select a session and click **Connect**. +
-  * To disconnect, Click the Junos Pulse icon again, select **OLIN** and then **Disconnect**. +
- +
- +
- +
- +
-=======VPN Behavioral changes ============ +
-With the introduction of the Juniper VPN client Olin has implemented what is known as split tunneling. +
-This allows users to utilize their home Internet connection for all non-olin resources and not have traffic routed through Olin's network unless it is destined for Olin resources. +
-Library resources are a prime example, previously you could go directly to these resources and you would be coming from an Olin owned IP address. This is no longer the case and you will need to use the Library web site to gain access to these resources. +
-  +
-http://​library.olin.edu +
- +
- +
-tags: public drive off campus, network drive off campus, public drive off-campus, network drive off-campus+
  
 +This page has moved to: [[vpn:​pulsesecurevpn|PulseSecure VPN Installation and Configuration]]