Note: these instructions were written for Macintosh OS X10.5 and above, the steps may be different for previous versions of OS X.

1. Connect to Olin’s fileserver, fsvs01
   1. Open up the Go menu in the finder and select Connect to Server option
   2. Enter: smb://fsvs01.olin.edu
   3. You may be prompted for a username and password to connect
      1. Connect as: Registered User
      2. Username: first initial last name
      3. Password: your network password
2. Select Applications as the volume that you would like to mount
3. Browse through Public > Printers > HP > HP T1100 Drivers
4. Mount the .dmg file in this directory and run the installer by selecting Mac OS X HP Designjet installer; follow the onscreen instructions.
   • You may be prompted for your administrative password during this installation, it is safe to enter it as prompted.
5. Click continue at introduction screen
6. Click continue at readme screen
7. Click continue at license screen, agree to terms
8. Accept the defaults at the installation screen (easy install) and click continue
9. After closing out any other running applications, click continue at the application warning popup screen. The installation should proceed from here

1. During the installation, a printer window will pop up, enter the following information:
   1. Protocol: Line Printer Daemon - LPD [This should be auto filled by default]
   2. Address: 10.24.8.229
   3. Leave the queue field blank
   4. Name: MHL22H01
   5. Location: MH Computer Lab
   6. Print Using: HP Designjet T1100ps 44in [this section should also auto fill]
2. Click Add
3. Click quit at the finish up screen

The new printer will now show up in the Printer List.