Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
visualnastran [2011/07/18 13:45]
jclifford created
visualnastran [2012/06/12 09:18] (current)
dterry
Line 1: Line 1:
 ====== Visual Nastran 4D 2004SP2 Installation ====== ====== Visual Nastran 4D 2004SP2 Installation ======
   - Uninstall your old installation of Visual Nastran via Add/Remove Prgrams   - Uninstall your old installation of Visual Nastran via Add/Remove Prgrams
-  - Go to START >> RUN and copy/paste the following in the box and then click OK.  \\stuapp\NETAPPS\Visual Nastran 4D\2004SP2\MSC.visualNastranDesktop\setup.exe +  - Go to **START->Run...**(**Windows Key + R**) and copy/paste the following in the box and then click **OK**.  ​\\ [[\\stuapp\NETAPPS\Visual Nastran 4D\2004SP2\MSC.visualNastranDesktop\setup.exe]] 
-  - Click Next. +  - Click **Next** 
-  - Click Yes” to accept the license agreement. +  - Click **Yes** to accept the license agreement 
-  - Choose ​VisualNastran4D” and click Next. +  - Choose ​**VisualNastran4D** 
-  - Check the boxes for Matlab and Solidworks integration modules. NOTE:  You need to have Matlab and Solidworks installed to add these modules or you will see the error below, but you will still be able to install Visual Nastran without them+  - Click **Next** 
-  - You may see the following if you don’t have Matlab and Solidworks installed+  - Check the boxes for Matlab and Solidworks integration modules. ​ 
-  - Click Next. +    * NOTE:  You need to have Matlab and Solidworks installed to add these modules or you will see an error, but you will still be able to install Visual Nastran without them. 
-  - Click Next (You do not need to view the Read Me file.) +  - Click **Next** 
-  - Click Finish. +  - Click **Next** 
-  - Now that you have finished the install, start the program.  You should be prompted with the screen  +  - Click **Finish** 
-below. Choose the FLEXlm Licensing” option and enter stuapp as the host and 1700 as the port  +  - Now that you have finished the install, start the program. Choose the **FLEXlm Licensing** option and enter **stuapp** as the host and **1700** as the port number. ​ 
-number. Click OKYou now have a fully licensed install+  - Click **OK** 
 +  - You now have a fully licensed install