• Touch the Crestron panel to activate the system (as it may be asleep).
  • This will take you to the control page.

• Connect your laptop to the provided VGA cable on top of the cart.
  • If using audio, connect the 1/8” plug (attached to the VGA cable) to the headphone output on your laptop.
  • If a network connection is necessary connect your laptop to the Ethernet cable which will also be connected to the right side of the lectern or use available wireless connectivity.
• Selecting the Computer input source from the top of the control page; this automatically turn on the projector and lower the screen.

• Selecting the DVD or VHS input source from the top of the control page; this automatically turn on the projector and lower the screen.
• Control buttons now appear on the screen for the selected source. Open the main cabinet door on the lectern, insert your tape into the VCR or DVD/CD and use the controls on the touch panel to play your VHS tape/DVD/CD

• Locate the Auxiliary inputs just below the accessory drawer and connect your audio/video source. Select AUX from the Crestron Panel.

System Shutdown Procedure * Once your presentation is over, press EXIT on the lower right corner of the Crestron panel. This will turn the projector off and raise the screen. Temporarily Hiding the Selected Display * Please use the mute button (located under the projector on and off buttons) to temporarily mute the displayed image during a presentation. Although no image is will be displayed, the projector bulb is still running. Troubleshooting * If the projector fails to turn on during touch panel activation or if you are experiencing any other strange system behavior please EXIT** the system and then boot back in. This will reset the system.

• It is necessary that the projector cool down for ~3 minutes before the option will be available to power on again.